OCS Cisco 675 Commands (subset)

Security Commands:

To enable remote logins and make local connections secure:

set password enable <password>
set password exec <password>

New Qwest PPPoA DSL:

Connecting with serial cable:

Use the 9-pin serial to RJ45 cable provided to connect your PC to the 675's management port.

Use Hyperterminal or the communication program of your choice to connect to the proper COM port.

Connection Settings:

CBOS Commands:

Dynamic:

set dhcp server enabled / disabled
set nat enabled
set web disabled
set ppp wan0-0 login <username>
set ppp wan0-0 password <password>
set ppp restart enabled

Static:

set dhcp server disabled
set nat enabled
set web disabled
set ppp wan0-0 login <username>
set ppp wan0-0 password <password>
set nat entry add/delete (*optional)
set ppp restart enabled

Static Subnet:

set dhcp server disabled
set nat disabled
set web disabled
set ppp wan0-0 login <username>
set ppp wan0-0 password <password>
set int eth0 address (*first usable address)
set int eth0 netmask (*depends on subnet size)
set ppp restart enabled

Bridged to PPP:

Connect using above serial cable settings (*required)

CBOS Commands:

Dynamic:

set bri rfc1483 disabled
set ppp wan0-0 ipcp 0.0.0.0
set ppp wan0-0 dns 0.0.0.0
set nat enabled
set web disabled
set ppp wan0-0 login <username>
set ppp wan0-0 password <password>
set dhcp server enabled/disabled
set ppp restart enabled

Static:

set bri rfc1483 disabled
set ppp wan0-0 ipcp 0.0.0.0
set ppp wan0-0 dns 0.0.0.0
set nat enabled
set web disabled
set ppp wan0-0 login <username>
set ppp wan0-0 password <password>
set dhcp server disabled
set ppp restart enabled
set nat entry add/delete (*optional)

Static Subnet:

set bri rfc1483 disabled
set dhcp server disabled
set nat disabled
set web disabled
set ppp wan0-0 login <username>
set ppp wan0-0 password <password>
set int eth0 address (*first usable address)
set int eth0 netmask (*depends on subnet size)
set ppp restart enabled